Category Archives for Baby Gate Advice

How To Build a Baby Gate: Easy Tips

If you have a baby or toddler around the house, you know how these little ones tend to meet every sort of accident. One moment they are playing happily, then after a few seconds, you find them crying because they hurt themselves while playing.

One of the most common causes of accidents is when babies go to a place inside the house that they are not supposed to be. Little ones love to explore and touch things, leading to them getting into every sort of accident.

Another cause of accident is the stairway where your baby or toddler can fall down and hurt himself badly.

Given this, it is important to have the proper safety mechanisms that can ensure and guarantee the safety of your baby. One important thing to have around the house are baby gates.

Baby gates are a necessary item inside the house if you have stairways and a large area where you don’t want your baby to go to. Baby gates can guarantee their safety and massively reduce accidents from happening.

If you want to install baby gates inside your home, you can have the option of building them yourself as long as you have the skill and right equipment.

This is especially helpful if you would like to place a number of baby gates around the house and would not want to spend hundreds of dollars in purchasing them.

How Do You Build a Baby Gate?

If you plan to build a baby gate to install around the house on your own, you can follow these easy steps. In no time, you can be relaxed that you baby is safe from harm and any accidents that may happen inside the house.

  1. Gather the needed materials and equipment:
    • Sandpaper
    • Measuring Tape
    • Wood
    • 2 Strong hinges
    • 1 Latch
    • Wood filler
    • Paint
    • Table saw/ saw
    • Drill
  2. After gathering the needed materials, you should start by measuring the width of your staircase or the area you are going to place your baby gate. Make sure that the piece of wood is measured smaller than the actual width of your staircase so it can swing in and out easily.  Also, the height of your baby gate should be two to three times higher than your little one so he cannot easily reach the latch or climb over the gate.
  3. Once you get the exact measurements, you can cut your piece of wood according to the appropriate measurement. If you plan to use a whole slab of wood, you will only need to cut an inch smaller on both sides to let it swing easily.
  4. After cutting your wood, sand the edges thoroughly until you get a smooth surface. This will ensure that your baby won’t get hurt by splinters and small pieces of wood sticking out on the corners.
  5. After sanding the wood, you can paint or varnish it according to the color that you like. Make sure that the wood is completely dry before moving on to the next step. It is easier to paint or varnish the gate before installation rather than after since this will prevent paint from getting all over the place.
  6. Drill holes in the wood and attach the latches. Make sure that they are drilled and screwed securely so they won’t fall off after some time. After doing this, install the latch on the wood, making sure that it reaches the area where the other side of the latch is going to be placed.
  7. You can screw the other side of the hinge to your wall by drilling the hole and placing the screws securely. Do this for both hinges on the upper and lower parts of the wood panel.
  8. Attach the second piece of the latch to the wood or banister where the first piece should be able to easily latch on. Make sure that it is not too loose, so it will not unlatch itself even if your baby shakes the baby gate hardly.

By following these steps, you can easily install any number of baby gates around your house to place your little one in a safe and secure environment. Make sure that all the hinges and latches are screwed on tightly and securely since a loose screw is an invitation for accidents to happen.

If you plan to use a baby gate that has slats or spaces in between the wood instead of a single panel, make sure that you measure the frame and the wooden correctly.

Furthermore, you should also make sure that each slat is spaced not more than three inches apart from each other to prevent your little one from squeezing in between them and getting himself stuck.

No matter what type of panel you choose for your baby gate, make sure that you cut them at the right height. Ideally, baby gates should be 22 inches or longer so your baby cannot easily climb over them.

You can also use your child’s height as a reference you can cut your baby gate’s height 2 to 3 times higher than your child’s height to ensure that he cannot go over and climb above it easily.

In addition to building the right height of baby gate, make sure that you place not more than three inches of space from the floor to the bottom of the baby gate. This will ensure that your baby will not be able to crawl under it easily or get himself stuck in the process.

Again, the key to building a baby gate by yourself is taking the right measurements. Measure the height and width of your baby gate two times so you are sure that you got the right numbers.

When attaching the latches and hinges, get help in aligning the wooden panel to the wall and staircase so you can easily attach it with no problems.

So if you are planning to build baby gates on your own so you can relax knowing that your little one is safe, you can do so right away!

By following these simple steps, your baby gates will be working just fine until your baby outgrows them.

How Tall Are Baby Gates?

If you have a baby or a toddler, you would want to provide him or her the best home where he or she can play around safely without meeting any form of accident.

One of the biggest sources of accidents at home with regards to little children is falling down the stairs and accidentally going to a place that can be dangerous like the garage, kitchen or the fireplace.

With this in mind, it is crucial to understand the importance of placing safety equipment around the house to protect your little one to prevent any untoward accidents from occurring. One such way to protect your little one and keep him or her safe is by placing baby gates in strategic places.

In this article, we will discuss the basic things you need to know about baby gates and to find out how tall are the baby gates you need for your home.

What is Baby Gates?

When your baby starts to crawl and walk, they can reach places around the house where they should not be. While you would like to keep watch over your little one, there are instances when you have to do chores around the house and cannot do so.

A way of ensuring that they are safe in a specific area that can limit accidents from happening is by placing baby gates.

Baby gates are commonly meant for children ranging from 6 months up to 2 years of age. This type of baby safety equipment is placed inside the house to prevent your little one from accidents like falling down the stairs.

Baby gates are devised in a way that toddlers cannot open them easily. This helps you to restrict them from going to other places around the house.

What are the Two Types of Baby Gates?

Basically, there are two types of baby gates that you can choose from depending on your need. Hardware-mounted baby gates are fixed and bolted to the framing inside the walls of your house.

This makes them a very secure type of baby gate and is best for places like on top of indoor or outdoor stairways.

The second type of baby gates is the pressure-mounted gates which are pressed on opposite wall sides. This type of baby gate is used in between rooms or below the stairs to prevent your baby from climbing up.

It should be noted that pressure-mounted baby gates are not very secure as compared to hardware-mounted types and should not be used on top of the stairway.

How Tall Should Baby Gates Be?

According to the Juvenile Products Manufacturers Association (JPMA), a baby gate should not be less than 22 inches in height to ensure the safety of your little one. Furthermore, the maximum distance between the bottom of the gate and the floor should not be more than 3 inches so your baby will not be able to crawl underneath it.

This will also prevent any accidents where your baby’s head or torso can get stuck and hurt himself.

As an easy guide in purchasing baby gates that have the appropriate height, you should always consider whether your baby is in the crawling or walking stage. The height of the baby gate you should be installing in your home should be appropriate to the height of your little one.

For example, if your baby is still crawling, then a baby gate that is approximately two to three feet higher than him is appropriate. If your child is already walking, then make sure that the baby gate is 2-3 times higher than his height.

With this, parents prefer purchasing taller baby gates so they can save up on purchasing a second one when their little one learns to walk.

Again, you should note that when your child reaches two years of age, these baby gates may no longer serve their purpose. By this age, your little one may learn to climb over your baby gate and may even hurt himself upon attempting to climb over a baby gate placed on top of your stairway.

What Should You Consider When Looking For Baby Gates?

In addition to finding the right height of a baby gate, there are also other things that you should consider to ensure the safety of your little one.

Secure mounting

As we have said earlier, baby gates have two types. You should choose a hardware-mounted baby gate if you plan on placing it on top of the stairs.

However, if you only plan to put a divider between two rooms or prevent your baby from crawling to a dangerous place inside the house, a pressure mounted baby gate can work just fine.

Easy-to-use latches

The latches of the baby gates should be easily used by parents but can never be opened by their little ones. This can ensure safety and prevent them from opening the gates on their own.

Door opening direction

When choosing and installing a baby gate, make sure that they are placed correctly with the door opening in the right direction. You can have the option of having a single-direction opening or a door that opens in both directions.


Since baby gates are meant to prevent your little one from going down the stairs, they should be made with durable materials that can withstand any form of shaking, pulling, and climbing.


In addition to durability, baby gates should be well constructed with the right spaces of at least three inches between vertical slats that will not let your child squeeze in between them or get his head stuck. If you choose a baby gate that has woven screen, make sure that these are strong and cannot be easily poked through.

By knowing these important details in the recommended height of baby gates and other factors that you should consider, you can guarantee that your little one will be safe inside your home.

With the right baby gate, you can be at ease that your baby is safe in the right place he should be in even if you are doing chores around the house.

Pressure-Mounted Baby Gates: Everything You Need to Know

Baby gates are one of the best safety equipments that we can have installed in our homes to ensure that our babies won’t get themselves in danger. This is because they confine our babies’ movements to certain places in our home while denying them access to other places, such as the kitchen, bathroom, windows, and stairways which pose a great danger to them.

There are three main types of baby gates. These are the pressure-mounted baby gates, the hardware-mounted ones and those specifically designed for wide or irregular areas. The pressure-mounted gate is easier to install than the hardware-mounted baby gate.

What are Pressure-Mounted Baby Gates?

A pressure-mounted baby gate is the other type of baby gate aside from the hardware-mounted ones. These are more portable and are easier to install than the hardware-mounted baby gates because these don’t require any special tools when installing.

You also don’t need to drill holes on your walls or door frames. You just simply stick the gate into place using devices that exert pressure on the walls or door frames. The sticking device functions by exerting outward pressure which firmly holds up the gate in place. This is where the gate draws its stability from.

The pressure-mounted baby gate is also considered to be more portable than the hardware-mounted one because you can easily remove and relocate it to another place at anytime. It doesn’t leave any visually unpleasant holes on the different parts of your house. Unfortunately, the pressure devices can leave markings on your walls forcing you to do a repaint job on your walls after you remove the gate.

Are Pressure-Mounted Baby Gates Safe?

Yes, pressure-mounted baby gates are safe, but not entirely. This is because this type of baby gate can easily be dislodged out of place because these aren’t drilled up on the wall or door frame. They are just positioned in place by the pressure device that exerts pressure to the wall or doorframe.

If you’re going to place it to just stop your baby from entering the kitchen or a room, it can be considered as safe. This is because babies aren’t interested in going to those places.

However, kids love going up and down stairs because of their innate natural instinct to explore their surroundings. Stairways are obviously dangerous places for kids because they can fall from it.

With this, it’s not safe if you’re going to install a pressure-mounted baby gate on a stairway. This is because your baby will still most likely pursue going to it because of their strong desire.

Remember that pressure-mounted baby gates are not firmly secured because if a baby exerts a lot of effort to push it over an extended amount of time, it’s very likely that it will be dislodged and removed.

Pressure-Mounted Baby Gates vs. Hardware-Mounted Baby Gates

The two types of baby gates have the same functions and purpose, and that is to serve as a form of a barricade to ensure your baby’s safety. However, they have different designs and levels of safety.

Hardware-Mounted Baby Gates

Hardware-mounted baby gates are firmer and more secured in place than the pressure-mounted baby ones. This is because they are installed by drilling holes into walls or and placing a bracketed to see to it that they stay in place even if it is moved. These are commonly made from aluminum tubing or wood. They are also usually coated with enamel to smoothen out its texture.

Pressure-Mounted Baby Gates

Then there are the pressure-mounted baby gates that are more portable and easier to install. What differentiates these from the hardware-mounted baby gates is that instead of drilling it and using a bracket to place it on the wall firmly, these have a suction-type sticking device.

This is only stuck on the wall or door edge by use of pressure. The pressure between the two sides is where it draws its firmness and stability from.

This is why these are not recommended to be installed on stairways because there is the likelihood that they may be dislodged out of place. But despite this, these are still more attractive than the hardware-mounted ones because you don’t need to drill holes into your walls or any part of your house.

These are usually made of plastic, wood, and aluminum tubing. These are also commonly coated with enamel for better texture and to make it more child-friendly.

The Benefits of Pressure-Mounted Baby Gates

It makes perfect sense for you to have baby gates placed around your house because of the many advantages that you can get from it. One of the best benefits you can get is that it helps limit your baby’s movements.

Knowing that babies are very curious and playful, it is very likely that they would go to places in your house which are dangerous for them, such as the kitchen, bathroom, and stairways.

With the help of a baby gate, you limit your baby from wandering recklessly around the house. This reduces the chances of them sustaining injuries. Remember that babies still aren’t fully developed which is why their movements are still not that well-coordinated.

Most of them still don’t know how to walk properly, while there are those that still crawl. You surely don’t want to expose your baby to the elements because they can get germs everywhere.

Bacteria can make them sick. By having a baby gate, you see to it that the stay in a clean and sanitized place which is conducive to learning, playing, and knowing more about their environment.


It is vital for you to have a baby gate installed in certain parts of your home to ensure that your baby is safe from danger. This sees to it that they don’t go to places which are dangerous for them.

However, it is also important for you to know the two types of baby gates so that you can use them correctly. Always use a hardware-mounted baby gate on stairways, because these are firmer and more secure. It is then up to you if you’re going to use the hardware-mounted ones or the pressure-mounted baby gates on other parts of the house.

Just remember that the pressure-mounted baby gates are more portable than the hardware-mounted ones, and you don’t have to drill holes to install them.

Baby Gates: Where to Place this Effective Child Protector

It is a well-known fact that babies are very fragile in almost all senses because they still don’t have the right intellectual, emotional, and physical capabilities. It’s because of this that we need to take extra care of them because anything can happen to them.

They might get themselves in an accident and hurt or even injure themselves in the process. We sure don’t want any of those to happen to our babies. One way of ensuring our baby’s safety is by having baby gates installed in our homes and using these to confine our babies in a single place and prevent them from going to hazard-prone areas.

What are Baby Gates?

Baby gates are protective barriers specifically designed to confine little children to a particular location of our homes. The barriers are also called child safety gates because their primary function is to ensure the safety of your child when indoors or outdoors.

This denies children access to certain places of the house which are unsafe for them. Examples of these areas are the bathroom, kitchen, and stairways. You sure don’t want to let your baby crawl and find their way to those places because they might injure themselves there while in these areas.

These baby gates are commonly made of metal, wood, or plastic. They can be easily adjusted and expanded so that they perfectly fit the width of stairways, doorways, hallways and wide or irregular areas that need childproofing.

There are three types of baby gates; these are the hardware-mounted baby gates, the pressure-mounted ones and baby gates for wide or irregular areas. They can be used indoors or outdoors.

Where to Put Baby Gates?

There is no doubt that baby gates are very effective in safeguarding your baby. However, it is also important for you to know the best places where you can install these safety gates. Here are some of the recommended places where you can install them:

Living Room

One of the places where you can install a baby gate is in your living room. This is because the living room has a lot of things like furniture and equipment, that might be dangerous to your baby. Examples of these things are TVs, wire cords, bookcases, and even tables. TVs can easily fall over when your baby crawls near its rack and bumps onto it.

They can also entangle themselves on the wire cords and accidentally electrocute themselves. Bookcases can quickly flip over and fall on your small child causing injuries to the child. Tables have hard and sharp edges that can cause injury if your baby bumps onto them.

It therefore makes perfect sense for you not to let your baby enter your living room, especially if you won’t be able to watch over them.


Your kitchen is perhaps one of the most dangerous areas in your house for your baby. This is because it is where you store your kitchen utensils, such as knives, forks, spoons, and more. You don’t want your baby to get close to these things because they’ll surely be in deep trouble as they can cut themselves or poke their eye.

Then there’s the oven, the stove, and all the wirings that might also endanger your baby’s life. To avoid this from happening, it’s best if you place a baby gate at the entrance to your kitchen. This way, they can’t enter this “dangerous for kids” zone.


Babies are very curious because this is the stage in their life where they explore the world and learn and understand things around them. This is the time when they get to know how things work.

With this in mind, it’s imperative to remember that you should be extra careful with their movement at this specific stage of their life. One of the most common accidents that children get themselves into is falling down the stairs.

Babies love to climb stairways because that is their innate instinct. With this, it’s best if you deny them access to stairs by putting baby gates at the top and bottom of stairs. But if you happen to have only one baby gate, prioritize installing it on either the bottom or top of stairs depending on where your baby spends most of their time.


Knowing that babies are naturally curious about the world around them, you should then understand that they would find ways to break free of the constraints around them. Don’t underestimate their capabilities because they find ingenious ways to climb and get out of the cribs and playpens.

When this happens, they’re likely to head to the windows. They can open it, and you know what happens next. They might fall over, especially if your windows don’t have grills. To stop this from happening, you can install baby gates on your windows, especially the windows that are in your baby’s room.


Bathrooms are a very dangerous place for your baby because this is the place where you store your medicine, household cleaners, and various toiletries such as shampoos and soaps. These are all dangerous especially when a baby makes contact with them because this might poison them.

Aside from that, your baby might slip and fall in the bathroom because bathrooms are wet most of the time. They can also drown in the toilet bowl if they fall head first into the toilet bowl.

To avoid this from happening, it’s best if you install a baby gate at the entrance of your bathroom. This way, your baby has no way of entering this zone and endangering their life.

This is crucial especially if you have a bathroom inside your bedroom. The baby gate will double the barrier to your bathroom because it’ll act as the primary obstacle that denies the baby access to the bathroom door.


It is vital for you to know where to place your baby gates because these useful things would be rendered useless if they are put in the wrong places.

When installing them, you should also make sure that they are correctly installed so that they won’t tumble over and cause further risks to your baby. For sure, your baby will be in safer hands when you’ve got these baby gates at your home.

Choosing and Using The Right Baby Gates For Stair Tops

Babies and stairs do not naturally match. In fact, stairs can be quite deadly for babies if left unattended, and may even pose a danger even when under parental supervision.

Few things can be quite as distressing and horrific for a parent and as traumatizing and painful for a young child than to fall down the stairs. That is why baby gates for top of stairs are an important baby safety item to have if you live in a multi-story house (or any house with stairs) and you have a little crawler or toddler just starting to learn how to move about.

Think and plan ahead

Most new parents do not see the need for a baby gate if their child is very young, as in a few days or weeks old, since they are not yet mobile and so they feel that a baby gate would be pretty useless.

However, the most prudent thing to do as a new parent is to prepare everything you might need for the baby for every developmental stage they might go through, and that includes the stage where they will become more mobile. One of those crucial responsibilities is baby-proofing your home.

Time will literally just fly by if you are a new parent and the demanding task of parenting will leave you baffled when the time comes that your baby is already crawling about while you barely had the time to put up a decent set of baby gates for top of stairs or wherever it may be necessary, such as around fireplaces or electrical outlets.

Accidents can happen and baby behavior can sometimes be unpredictable. That is why thorough thought must be put into baby proofing your home before the toddler reaches that stage of their life when they are all over the place trying to learn anything about everything they encounter.

Don’t fuss too much about aesthetics

Fortunately, these days baby gates are usually made of materials and colors that are classy and can easily blend into any home. Some parents may worry that mounting baby gates will cause some damage to their walls, while other just think that they are a sore sight.

However, you cannot discount the fact that stairs can be very dangerous and potentially life threatening for your little one, so it is definitely a must that you install these gates.

Besides, you can always go around and find creative ways on how to make your baby gates blend seamlessly into your home as if they were originally a part of it in the first place.

Try to sort out the kind, type and quality of baby gate that you will need

This will largely depend on the layout of your house. You have to first see where you intend to use it and get the right measurements of that area with precision since it must fit snugly to work.

Gates are usually installed by mounting them onto the walls or with the use of a pressure locking system that keeps it in place without the need for screws. You may find mounted gates to be more efficient and sturdier since they cannot be easily removed with even great force or weight exerted by your child.

However, if you plan on removing and relocating the gate several times throughout the day or week, you might consider the pressure lock type since it is generally easier to uninstall and install. Just make sure not to use this type of baby gate for top of stairs because of its tendency to pop off with great force.

Make sure to test the gate

Try opening it by yourself. Try it with one hand while carrying your baby or something else, because chances are, you will have to do this single-handed opening all too often when you go through it while carrying your baby.

Ideally, you will be able to open and close it with just one hand; otherwise, it would be difficult and even impossible to use it.

Inspect the installation on a regular basis

Baby gates for top of stairs, especially if they are the pressure locking type, have the tendency to become loose and pop off if your baby leans on them with most of his weight.

Mounted gates are no exception as well since the screws and bolts may also corrode or become damaged in time since babies and young children usually not only lean on but also pull, push, and attempt to climb over the device. Check for loose screws or detached poles and readjust as needed.

Get older children acquainted with the baby gate

Teach older kids on how to properly use the gate – on how it works, how they could open it, and the importance of properly closing it afterward.

Make sure to stress this as often as possible until you are 100% sure that your older child has it understood to make sure of your baby’s and your other children’s safety within the house at all times.

Again, accidents can happen anytime, and kids, even older ones, can sometimes forget the huge responsibility of using a baby gate and making sure that it is properly closed.

The Different Types of Baby Gates You Could Buy

Different types of baby gates come in many styles and sizes, various colors and different specifications; but basically speaking, there are three main types of baby gates and they are the following:

Hardware-mounted baby gates

The first type is easily the most reliable since these gates are actually mounted onto the wall. For this reason, this makes these gates probably the sturdiest of all types of baby safety gates. In fact, they are often referred to as stairway gates because they are the most suitable baby gates for stairs (which poses as one of the greatest danger zones for very small kids).

Even if they are the mounted type, they can also be easily dismounted for instances when the baby gate is not needed for the moment or if it is no longer needed for a long period of time such as in between children.

This type of baby gate is the most efficient at baby-proofing your home to keep litle children safe although it may cost you a bit more effort in installing it compared to other types. To ensure that you get the most out of your baby gate, make sure that you choose the right gate dimensions for the exact locations that you plan to use it.

Make sure to read and follow the instructions beforehand and not only while you are installing it. Gate mounts usually come with your purchase, but you may need more from your local hardware.

Pressure fitted baby gates

The second one in the types of baby gates is the pressure-mounted gate. Originally, they were made as simple fences that were wedged between two walls or against the door frame to block the way for a baby. They did not come with gates and thus you actually had to step over them to get to the other side.

However, these days, they have been built with gates or doors that can open and close. The gate is held up by extended threaded pressure pads to the wall or door jamb which allows them to stay in place. Just make sure to be careful of mounting these types of baby gates on hollow walls as they may poke through them and make a hole.

These are also not ideal to be mounted on stairways since they are not as reliable as the hardware mounted types which typically hold up much better when children are actually making an attempt at crossing the barrier by pushing, pulling, or even climbing over.

Although these types of gates usually do not require you to drill a hole or screw a piece of metal into your wall, you still may find that after dismounting it, your may need to recoat your wall with some paint due to the pressure that it exerts onto the surface.

So if you are choosing this type of baby gate for aesthetic purposes, take heed. This type of baby gate is best for in between rooms, mounted on door jambs, or against two parallel walls in a hallway.

Gates for wide or irregular areas

If you have an extra wide or an irregularly positioned opening, this may be a bit more challenging when it comes to childproofing your home. But with a bit of planning and some execution skills, you may end up achieving it beautifully. For wide openings, such as when you are looking at spaces beyond three feet, there are actually hardware extensions that can accommodate your entry on top of the existing baby gate.

This way, you have a set of a fence and a gate so that as you go through it, you will only be swinging the gate as the entire fence stays in place. For spaces that are beyond five feet in width, some sense of creativity could be very helpful in meeting the need.

As for irregular spaces that need barricading, there are certain brands that can actually cater to different angles of installation. You may encounter this need in order to block off a baby from a wide based stair landing, or a fireplace.

Additionally, these types of baby gates can also be transformed into baby playpens as they can be formed into a geometric enclosed form for you to be able to put the toys all in one area and put the baby in with them as well.

This is a great idea if you want safe floor play for your baby while keeping them safely enclosed in a designated place while you do chores or work with better peace of mind, as opposed to leaving them to have the entire floor space of the house for themselves. This can be also useful if you want to corner your baby while you are doing your vacuuming.

Choosing the right baby gate for you and your baby will all depend on the layout of your home and how you intend to use it. Try to determine exactly what you need and get the exact dimensions.