Where to Place this Effective Child Protector

Baby Gates: Where to Place this Effective Child Protector

It is a well-known fact that babies are very fragile in almost all senses because they still don’t have the right intellectual, emotional, and physical capabilities. It’s because of this that we need to take extra care of them because anything can happen to them.

They might get themselves in an accident and hurt or even injure themselves in the process. We sure don’t want any of those to happen to our babies. One way of ensuring our baby’s safety is by having baby gates installed in our homes and using these to confine our babies in a single place and prevent them from going to hazard-prone areas.

What are Baby Gates?

Baby gates are protective barriers specifically designed to confine little children to a particular location of our homes. The barriers are also called child safety gates because their primary function is to ensure the safety of your child when indoors or outdoors.

This denies children access to certain places of the house which are unsafe for them. Examples of these areas are the bathroom, kitchen, and stairways. You sure don’t want to let your baby crawl and find their way to those places because they might injure themselves there while in these areas.

These baby gates are commonly made of metal, wood, or plastic. They can be easily adjusted and expanded so that they perfectly fit the width of stairways, doorways, hallways and wide or irregular areas that need childproofing.

There are three types of baby gates; these are the hardware-mounted baby gates, the pressure-mounted ones and baby gates for wide or irregular areas. They can be used indoors or outdoors.

Where to Put Baby Gates?

There is no doubt that baby gates are very effective in safeguarding your baby. However, it is also important for you to know the best places where you can install these safety gates. Here are some of the recommended places where you can install them:

Living Room

One of the places where you can install a baby gate is in your living room. This is because the living room has a lot of things like furniture and equipment, that might be dangerous to your baby. Examples of these things are TVs, wire cords, bookcases, and even tables. TVs can easily fall over when your baby crawls near its rack and bumps onto it.

They can also entangle themselves on the wire cords and accidentally electrocute themselves. Bookcases can quickly flip over and fall on your small child causing injuries to the child. Tables have hard and sharp edges that can cause injury if your baby bumps onto them.

It therefore makes perfect sense for you not to let your baby enter your living room, especially if you won’t be able to watch over them.


Your kitchen is perhaps one of the most dangerous areas in your house for your baby. This is because it is where you store your kitchen utensils, such as knives, forks, spoons, and more. You don’t want your baby to get close to these things because they’ll surely be in deep trouble as they can cut themselves or poke their eye.

Then there’s the oven, the stove, and all the wirings that might also endanger your baby’s life. To avoid this from happening, it’s best if you place a baby gate at the entrance to your kitchen. This way, they can’t enter this “dangerous for kids” zone.


Babies are very curious because this is the stage in their life where they explore the world and learn and understand things around them. This is the time when they get to know how things work.

With this in mind, it’s imperative to remember that you should be extra careful with their movement at this specific stage of their life. One of the most common accidents that children get themselves into is falling down the stairs.

Babies love to climb stairways because that is their innate instinct. With this, it’s best if you deny them access to stairs by putting baby gates at the top and bottom of stairs. But if you happen to have only one baby gate, prioritize installing it on either the bottom or top of stairs depending on where your baby spends most of their time.


Knowing that babies are naturally curious about the world around them, you should then understand that they would find ways to break free of the constraints around them. Don’t underestimate their capabilities because they find ingenious ways to climb and get out of the cribs and playpens.

When this happens, they’re likely to head to the windows. They can open it, and you know what happens next. They might fall over, especially if your windows don’t have grills. To stop this from happening, you can install baby gates on your windows, especially the windows that are in your baby’s room.


Bathrooms are a very dangerous place for your baby because this is the place where you store your medicine, household cleaners, and various toiletries such as shampoos and soaps. These are all dangerous especially when a baby makes contact with them because this might poison them.

Aside from that, your baby might slip and fall in the bathroom because bathrooms are wet most of the time. They can also drown in the toilet bowl if they fall head first into the toilet bowl.

To avoid this from happening, it’s best if you install a baby gate at the entrance of your bathroom. This way, your baby has no way of entering this zone and endangering their life.

This is crucial especially if you have a bathroom inside your bedroom. The baby gate will double the barrier to your bathroom because it’ll act as the primary obstacle that denies the baby access to the bathroom door.


It is vital for you to know where to place your baby gates because these useful things would be rendered useless if they are put in the wrong places.

When installing them, you should also make sure that they are correctly installed so that they won’t tumble over and cause further risks to your baby. For sure, your baby will be in safer hands when you’ve got these baby gates at your home.

Click Here to Leave a Comment Below